我使用BQ24610做充电设计，26V输入，24V充电电压/1A充电电流设计。有使用power path。 1、在调试中发现，电池不在位的情况下 ...

I am testing TPS546E25EVM-1PH, but found out that FUSION_DIGITAL_POWER_DESIGNER 7.10.1 version on the website does not support TPS546E25.

This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...

As per the datasheet, LM5050-2 is a wide input voltage operation range IC (Recommended Vin: 6V to 75V). But primarily, it appears to be best suitable for 48V power supplies applications. Is it ...

I am trying to calculate losses for the synchronous MOSFET. In table 2-2, the body diode conduction loss uses a term of (Vload*Fsw)/2. This results in a very high calculated loss. I think the voltage ...

Using the FPD-Link III. I have my setup almost working (streaming SD video, sorta) with the 91xA eval boards. Problem is that my LOCK status is not consistent. Do you know what sorts of things can ...

C2000ware 5.02 地址变量为：COM_TI_C2000WARE_INSTALL_DIR，CCS12.2以上版本能够直接匹配识别！ 但是C2000ware4.03版本地址变量为：COM_TI ...

We have encountered a strange phenomenon while using the BQ4050. **Background:** The BQ4050 is used to manage a 4-series lithium battery pack with a designed capacity of 6600mAh, and the initial FCC ...

We are working on DRA821U CPU with Linux SDK 09.02, we are facing issue with sd voltages switching in uboot, Here is the senario,initially detects with UHS mode, but once we launch "mmc rescan" again ...

We have a project which uses C2000 f28003x. Our customer requests that our device should execute the odd application while updating new application. I have studied about LFU lately. The diagram below ...

PFC驱动部分的，EPWM1-A和EPWM1-B起的什么作用？我看在程序里没有设置它的占空比？ 在Lab4中关于如下代码几个变量的理解 ...